国产精品一卡二卡三卡,国产午夜精品av一区二区麻豆 ,国产成人欧美日韩综合

^{}

首頁 > 英聯產品 > 接口 > 電平轉換器

UM3284FQS
用于漏極開路和推挽應用的4位雙向電壓電平轉換器

Datasheet

Reliability Report

Package Information

	Outline-QFN14 3.5×3.5.pdf
	Land Pattern-QFN14 3.5×3.5.pdf

more...

Order Sample

Key Specifications

Part Number	Description	Status	VCCA(Min)(V)	VCCA(Max)(V)	VCCB(Min)(V)	VCCB(Max)(V)	Max Data Rate(Mbps)	No. of Bits	Operating Temperature Range(℃)	Pin/Package	EV Kit Available?
UM3284FQS	用于漏極開路和推挽應用的4位雙向電壓電平轉換器	ACTIVE	1.1	5.5	1.1	5.5	100	4	-40 to 125	14/QFN 3.0×3.0	Y

View All>>
Product Description

The UM3284F is 4-channel ESD-protected level translator provides the level shifting necessary to allow data transfer in a multi-voltage system. Externally applied voltages, V_CCB and V_CCA, set the logic levels on either side of the device. A low-voltage logic signal present on the V_CCA side of the device appears as a high-voltage logic signal on the V_CCB side of the device, and vice-versa. The UM3284F bidirectional level translator utilizes a transmission-gate based design to allow data translation in either direction (V_CCA↔V_CCB) on any single data line. V_CCA and V_CCB have a common operating voltage from +1.1V to +5.5V. V_CCA being less than V_CCB is no longer a requirement.

This device is fully specified for partial-power-down applications using IOFF. The IOFF circuitry disables the outputs, thus preventing damaging current backflow through the device when it is powered down. The V_CC isolation feature is designed so that if either V_CC input supply is below 100mV, all level shifter outputs are disabled and placed into a high impedance state. The UM3284F enters a three-state output mode to reduce supply current when output enable (OE) is low. The UM3284F is designed so that the OE input circuit is supplied by V_CCA. ±8kV ESD protection on both sides for greater protection in applications that route signals externally.

The UM3284F series are available in TSSOP14, QFN12 1.7×2.0, QFN12 1.8×1.8 and QFN14 3.5×3.5 packages.

Features

-Max Data Rates:

100Mbps (Push-pull, 1.8V to 3.3V)

2Mbps(Open-drain)

-V_CCA and V_CCB are independent: V_CCA may be greater than, equal to, or less than V_CCB

-I_OFF supports partial power-down mode operation
-V_CCisolation feature – if either V_CC input is at GND, all are in the high-impedance state

-No Direction-Control Signal Needed
-No Power-Supply Sequencing Required V_CCA or V_CCB Can Be Ramped First

-Low Power Consumption

-ESD protection on A and B port:
±8kV Human-Body Model

-Latch-Up Performance Exceeds 800mA

Applications

-SPI, MICROWIRE, and I²C Level Translation